Zhanlida AB Epoxy Glue 24ml Review, Characteristic

Zhanlida AB is an epoxy glue, also known as high viscosity iron glue. It has high tensile strength, alkali and acid resistance, waterproof and good adhesion.

Features:

This glue belongs to the medium curing speed series. It can harden at low or normal temperature and reaches maximum strength after 24 hours.

Scope: Widely used in the repair and installation of electronic components, handicrafts and gifts. With excellent bonding strength, it can be applied to bond metal (iron, copper, stainless steel), ceramics, wood, glass, jewelry and hard plastic

Manual mixing:

Glue gun operation: The sealing part should be dry and clean. Fix it on the AB glue gun to work. Usage Note: When using for a long time, the workplace should be well ventilated. If there is any contact with the skin, wash with plenty of water. This product is flammable, please keep it away from fire and keep it out of reach of children. It should be stored in a dry and cool place without exposure to the sun.

Characteristic:

Product name: AB Contact Adhesive Brand: Zhanlida-JIAOSHUILAO Capacity: 24ML Color: transparent Component: epoxy resin Viscosity: 7000-11000mpa.s (25°c) Stretching hard cutting strength: ≥18MPA Gel time: within three minutes Ratio: 1:1 Cure time: 2 hours initial cure, 24-48 hours full curing (medium-speed curing）Application: suitable for bonding, repairing, splicing, can bond metal, plastic, glass, ceramics, wood, jewelry, hard materials, etc.,. Shelf life: suggest 12 monthes Usage: cut the seal open and squeeze the bottom piston, squeeze out the glue in a 1:1 ratio, mix well andapply it on the surface of the object to be bonded Note: after the glue is extruded, try to stick it to the object within two minutes to prevent the glue fromhardening due to contact with air