Ideal Arched Greenhouse for Cellular Polycarbonate 2x2m: Overview and Specifications

The greenhouse frame is made of 20x20mm square tubing with a thickness of 1mm. The tubing is hot-dip galvanized, protecting it from corrosion and extending its service life for many years.

Complete kit:

- Hot-dip galvanized profile pipe frame

- All necessary hardware

- Ground anchors

- Detailed instructions

The greenhouse also comes with 4-6 mm thick cellular polycarbonate.

Technical specifications:

- 20x20 hot-dip galvanized profile

- Dimensions:

Width - 2 m

Height - 2 m

Length - 2 m (increases to 5 m with an additional 1 m section)

- Solid arches

- 1 door and 2 vents (located at the ends)

- Distance between arches: 1 m

The advantage of our greenhouses is that we use only solid, bent arches made of hot-dip galvanized profile pipe with a fully welded seam. Installation is very easy and requires no special skills. Assembly time is approximately 3-5 hours. The greenhouse is installed on the ground or on a pre-prepared foundation (concrete or timber).

You can purchase the Ideal 2x2 m arched greenhouse for cellular polycarbonate in Ukraine by ordering online or by calling our hotline.