The ridge profile for polycarbonate is used in cases where it is necessary to organize a so-called ridge on the roofs of polycarbonate structures, for example, in greenhouses with a “house” shape. Also, the ridge profile is used on gazebos and canopies, if they have a similar geometry and for some reason do not have an arched or straight roof. The ridge profile is a strip with grooves on both sides for inserting polycarbonate sheets. Unlike a conventional connecting profile, the ridge profile strip is wider and more flexible, and has the ability to bend at a certain angle. Thus, it makes it possible to organize the joint of polycarbonate sheets and get a ridge and roof shape like a house. The ridge profile is a salvation for those who are installing such a structure. The ridge profile is produced in a transparent form and 6 meters long, for different thicknesses of cellular polycarbonate sheets. It can be easily cut with a regular knife into the required lengths.

The main advantages of a polycarbonate ridge profile include:

light weight;

flexibility;

high strength;

reliability in operation;

ease of installation.

Polycarbonate ridge profile is available for cellular polycarbonate sheets of standard thickness.

The polycarbonate profile is as resistant to ultraviolet rays as sheet cellular polycarbonate.

To protect the bottom of the sheet, we recommend using a special perforated tape, which also consists of a polymer base and several layers of waterproof materials. Holes (perforations) are made in the tape to allow water to pass through from the honeycomb. And for the top of the sheet, use non-perforated tape to prevent dust and dirt from getting inside the honeycomb.

Ridge polycarbonate profile 8-10 mm buy wholesale and retail with delivery throughout Ukraine