Self-adhesive sealing soundproofing tape ALENOR® XLPE provides a tight connection of metal profiles of the frame with load-bearing building structures at the junction points and thereby improves sound insulation between elements of building structures, compensates for thermal expansion. Excellent adhesion to various building surfaces: glass, aluminum, steel, polymer coatings, fiberglass, etc.

Product composition:

Chemically cross-linked foamed polyethylene sheet, high-tack adhesive layer, anti-adhesive material.

Scope of application:

Soundproofing tape ALENOR® XLPE is used to prevent the transmission of sound vibrations through connecting elements of structures, metal profiles, communication boxes, etc. The mounted frame partition without soundproofing tape acts like a drum, amplifying sound vibrations.

ALENOR® XLPE tape is a necessary condition for frame

construction.

Advantages:

high adhesion (stickiness) to most materials;

resistant to fungus and rot;

environmentally friendly, does not contain substances hazardous to life.

Color: Gray

Packaging: Roll

Shelf life: 12 months in closed original packaging.

Health and safety:

Before use, you should read the Product Safety Data Sheet.

Warranty obligations:

The manufacturer guarantees that the product meets the stated technical specifications during the shelf life when stored in recommended conditions.

Storage conditions:

Store in a ventilated warehouse at a temperature of +5 to +40 degrees and a humidity of no more than 80%, at a distance of at least 1 m from heating devices, avoid direct sunlight.

Instructions for use:

Before using ALENOR® XLPE soundproofing tape, all surfaces must be clean, dry, degreased and free from oil, grease and dust. It is necessary to remove organic, technological contamination, atmospheric manifestations (dust, condensate) from surfaces in the sealing zones that are in direct contact with the tape.

Peeling, weak and porous bases must be primed before gluing the tape.

Remove the packaging material from the tape roll. Cut the tape to the required length. Remove the release material.

Adhere the tape to the working surfaces by pressing evenly.

Avoid the formation of air voids and/or folds, excessive tension/sag of the tape. The connection of several pieces of tape is carried out close together.

Technical characteristics:

Base density kg/m3 30 ± 10%

Water absorption (96 h) by volume, not more than % <0.8

Tensile strength, not less than kPa 150

Elongation at break in the transverse direction, not less than % 100

Elongation at break in the longitudinal direction, not less than % 90

Tackiness to steel (adhesion), not less than N/25mm 14

Tackiness by the rolling ball method cm 6-7

Operating temperature - 40С - + 75С

Recommended installation temperature + 5С - + 40С